• Four-polarity SAT signal inputs and one Terr. signal inputs.
• Work with Quad/Quattro LNB or non-selective LNB output.
• Need to work with standalone multiswitch 440514U.
• One UnicableTM output with 4 SAT programs and Terr. signal.
• No DC to LNB, 12VDC from trunk line for internal terrestrial amplifier.
• DIP SW On/Off control for 12VDC pass from Terr. trunk output to Terr. trunk input port. It is to avoid short to Terr. Antenna.
• Cascadable UnicableTM Multiswitch design.
• Beside terrestrial amplifier powered from terrestrial trunk line, all others powered by 13VDC from receivers.
• Maximum 4 user bands for 4 subscriber receivers.
UMC-54 | Typical Value | Q.C. Limit | Remark | |
Frequency Range |
Terrestrial (TER) | 47 ~ 862 MHz | ||
Satellite (SAT) | 950 ~ 2150 MHz | |||
Input Ports | 4xLNBs, TER | F-Type Female Connector |
||
Output Ports | 1 (4 Users), 4xSATs, TER (Trunk) | |||
Trunk Gain | TER | -2 dB | ≧ -3.0 dB | Passive |
SAT | -2.5 dB | ≧ -3.5 dB | Passive | |
Subscriber Gain | TER | 7 ± 2 dB | 7 ± 3 dB | |
SAT | 13 ± 2 dB | 13 ± 3 dB | ||
Isolation | Trunk / Trunk | 35 dB | ≧ 30 dB | |
Switching Isolation | 35 dB | ≧ 30 dB | ||
Return Loss | Trunk | 10 dB | ≧ 8 dB | |
Subscriber | 8 dB | ≧ 6 dB | ||
Max. O/P Level | TER | 104 dBμV | ≧ 100 dBμV | 60 dB IMA3 @ 50083-5 |
SAT | 104 dBμV | ≧ 100 dBμV | 35 dB IMA3 @ 50083-3 | |
Command from Subscriber | EN 50494 (Extension DiSEqC 1 Standard) | |||
User Band (0 ~ 3) | 1210 / 1420 / 1680 / 2040 MHz | |||
PIN Code for MDU Installation | 6F / DE / 7F / EE | |||
Power consumption without LNB |
Terr. Amplifier | 50mA Max. | @ 12V on Terr. Trunk Line | |
Others | 150mA Max. | @ 13V Receivers | ||
Dimension without PSU | 105mm (L) x 88mm (W) x 34mm (H) | |||
Weight | 190 g | |||
Working Temperature | -20 ~ +55 ℃ |